The ЕS-1000 multi-saw single-shaft rig is designed for rip sawing two- and three-edged cants up to 1,000 mm high and up to 1,000 mm wide, as well as for cutting unedged boards and four-edged cants. The ЕS-1000 rig is used as the second rig. It is used to receive high-quality lumb at enterprises and saw mill shops, as well as to produce joinery. It is recommended for use in medium and high capacity saw mill lines.
The rig is designed for cutting edged lumb with the accuracy of 0.5 mm in one stroke and with good surface quality.
To remove cuttings efficiently, the ES-1000 rig is equipped with a belt conveyor at the bottom.
• The following units may be installed additionally:
live and idle rollers;
|Maximum timber height, mm||100|
|Minimum timber height, mm||20|
|Minimum timber width, mm||960|
|Edge saw pitch, mm||920|
|Minimum timber length, mm||800|
|Shaft diameter, mm||80|
|Saw blade diameter, mm||350|
|Feed rated, m/min||0-40|
|Feed drive, kW||2,2|
|Saw shaft motor power, kW||30 (22;37)|
|Input capacity, m3/h||6 и более|
|Weight, kg||2 180|