The SD-400 woodcutting machine intended for longitudinal cutting of logs of diameter from 120 to 400 mm on two-edged cant and unedged board. The SD-400 machines are used as a first line machine in pallet production, as well as in other high capacity wood-processing enetrprises (10-18 m3 per hour).
The machine is intended for sawing logs in one pass on unprocessed lumber with an accuracy of 0.5 mm. and good surface quality. The machine’s design makes it possible to cut the center of the log. For efficient removal of sawdust, a belt conveyor is installed at the bottom of the machine. In addition, a waste separator is mounted at the end of conveyor, which prevents the particles and sawdust from clogging the aspiration system.
|Maximum log diameter, mm||400|
|Minimum log diameter, mm||120|
|Minimum log length, mm||1100|
|Saw blade diameter, mm||550|
|Shaft diameter, mm||80|
|Maximum number of shaft-mounted saws||7|
|Shaft rotation frequency||1500|
|Feed rate, m/min||0-30|
|Feed drive, kW||2,2/2*0,37(3.0)|
|Top shaft engine capacity, kW||37 (30;45;55;75)|
|Lower shaft engine capacity, kW||45 (37;55;75)|
|Input productivity m3/h||10 and more|
|Length of supply, mm||4 200|
|Weight, kg||4 050|