The single-shaft multi-saw machine MS-160 is designed for longitudinal sawing of double flat-faced cant and three-side edged cant timber up to 160 mm high and up to 600 mm wide into edge boards and four-side edged cant. Often used for the production of pallet blanks and tare boards.
The machine MS-160 is used as a second-row machine, combined with a headrig forms a single production line. The machine is designed for sawing logs in one pass on edged sawn timber with an accuracy of 0.5 mm and good surface quality.
For efficient removal of sawdust, a belt conveyor is installed under the machine. In addition, a waste separator is imounted at the conveyor, which prevents the particles and sawdust from clogging the aspiration system.
|Maximum height of prism, mm||160|
|Minimum height of prism, mm||30|
|Maximum width of prism, mm||600|
|Edge saw gap, mm||550|
|Minimum length of prism, mm||800|
|Shaft diameter, mm||80|
|Saw blade diameter, mm||450|
|Maximum quantity of shaft-mounted saws, pcs.||12|
|Feed rate, m/min.||0-25|
|Feed drive, kW||5,5|
|Top shaft motor power, kW||45(30;55)|
|Input capacity, m3/h||5 and up|
|Weight, kg||1 890|